SHOP ONLINE – Products Page

1) Vector Grind Fixture

The fixture consists of the items pictured and described below.With these on your grinder you can perfectly replicate the multi bevel grind every time. IT is basically plug and play if you already have a Wolverine set-up you simply put this into your base mounts at the prescribed seven inch back-set and you should get a bevel similar to what you have been doing if not adjusting in or out will get you there. Experimenting will yield many possibilities!
“Depth Guide-Flute up Fixture” using this device you will be able to set adjustable steel projection and also index the flute up. This is accomplished in existing “jigs” internally in the steel hold device, doing it that way makes it impossible to move the steel forward enough to grind all the flute length.
“Steel Hold Fixture” innovation is that there is nothing to prevent the steel from sliding all the way forward for grinding of the entire flute. Indexing being done as in the picture to the left, with flute-up and projection set simply lock the “T” handle and you are ready to grind.
“Pivot Plate” this is the magic, this is what creates the multi bevel grind. Using more than one point to pivot the steel hold fixture is key.
The two side pivots create the primary grind and then stepping up to the center-center pivot for the secondary grind and last the pivot for the final bevel is closest to the wheel.
For a bigger understanding of how this works go to our “Product Overview” and under there click on “Vector” for Michelsen grind!

$169.95Price:
Loading Updating cart…

2) Bench Wrench

The Bench Wrench is a real handy item, it is meant to be screwed to the edge of the bench just below your grinder so it is easy to come up into it to loosen the collet for steel removal and grinding. With both hands on the grip there is plenty of torque to tighten or loosen w/o the need for a second wrench, one of my best ideas! Each collet handle owner receives one complimentary Bench Wrench.

$6.00Price:
Loading Updating cart…

3) Small Diameter Handle (collet)

For Full info about the handles please go to the Products Overview page and review both the Michelsen Gouge and Handles Set-up and use.

To order online simply click the add to cart button then when you’re ready to checkout click ‘Go To Checkout’ on the right column.

For phone orders or more info call 802-362-3481 and speak with JoHannes or Deb. We can accept Visa or MC or make arrangement for payment by check.

$0.00Price:
Loading Updating cart…

4) Large Diameter Handle (collet)

For Full info about the handles please go to the Products Overview page and review both the Michelsen Gouge and Handles Set-up and use.

To order online simply click the add to cart button then when you’re ready to checkout click ‘Go To Checkout’ on the right column.

For phone orders or more info call 802-362-3481 and speak with JoHannes or Deb. We can accept Visa or MC or make arrangement for payment by check.

from $80.00Price:
Loading Updating cart…

A-11 Replacement Steel

The tool steel is custom made for us in extra length and extra flute length so that makes for less changing of steel longer use period and great return on investment, fully worth the slightly higher price tag. CPM10V steel also known as A11 is the best steel available today for the woodturning application.

Steel is available in 6 sizes now 3/8”, 1/2”, 5/8”, ¾”, 1” and 1 ¼” all cut from solid CPM10V bar stock and triple tempered to Rockwell 62 and cryogenically toughened between both first and second heat treatments, also known as A-11 steel.

Additional DescriptionMore Details

To order online simply click the add to cart button then click
‘Continue Shopping’ or click ‘Go To Checkout’

For phone orders or more info call 802-362-3481 and speak with JoHannes or Deb. We can accept Visa or MC or make arrangement for payment by check.


$0.00Price:
Loading Updating cart…

CBN Grinding Wheels

Our CBN wheels are made in Austria by Opti-Grind and are the best quality we could find and yet very competitively priced.
They are heavy/thick walled and perfectly balanced with a unique side coating on the standard grit only that is useful for many grinding situations.
These are a new product for us so please call for pricing and availability, we have stock of 6 and 8 inch wheels and flanges for 1/2″,5/8″,3/4″ and 1″ there are three grits,180 grit is called the standard grit for sharpening and the 80 grit is for shaping your steel there is also a fine grit 240 for the finest edge possible from a grinder.
CALL 802 362 3481 studio or 802 353 0523 cell for info.

$219.00Price:
Loading Updating cart…

HannesTool – 1 1/4″ A-11 Replacement Steel

The 1 1/4″ tool is for spindle roughing, I use this tool when turning my stands and wall racks for my hats as well as the ocasional Newel post or Baluster.

CPM10V steel also known as A11 is the best steel available today for the woodturning application. 

Additional DescriptionMore Details

To order online simply click the add to cart button then click
‘Continue Shopping’ or click ‘Go To Checkout’

For phone orders or more info call 802-362-3481 and speak with JoHannes or Deb. We can accept Visa or MC or make arrangement for payment by check.


$180.00Price:
Loading Updating cart…

HannesTool – 1″ A-11 Replacement Steel

This large piece of steel is made specifically for us, considered too large and not sold by others. Hannes says that this tool will do things that other steel cannot. Used in the right context and with the proper grind it is a must have! CPM10V steel also known as A11 is the best steel available today for the woodturning application.

Steel is available in 6 sizes now 3/8”, 1/2”, 5/8”, ¾”, 1” and 1 ¼” all cut from solid CPM10V bar stock and triple tempered to Rockwell 63+ and cryogenically toughened between both first and second heat treatments, also known as A-11 steel.

Additional DescriptionMore Details

To order online simply click the add to cart button then click
‘Continue Shopping’ or click ‘Go To Checkout’

For phone orders or more info call 802-362-3481 and speak with JoHannes or Deb. We can accept Visa or MC or make arrangement for payment by check.


$169.00Price:
Loading Updating cart…

HannesTool Calipers 18″

We carry these large calipers for those who do hats and/or other large turnings  that require the reach available with the 18″ throat. The 8″ calipers in the pic are there for scale.

$39.00Price:
Loading Updating cart…

Hat Bender – Full Size

This is the bender that I use, it has evolved a lot since bender one and offers all the function and flexibility needed to bend any hat style. All Hardwood construction.

$125.00Price:
Loading Updating cart…

Hat Bender – Mini Hat Size

This is the bender that I use for Mini Hats, as you can see there is no adjust ability simply squeeze the legs together and apply the plywood “C” clamp. For this dimension bender you should turn the OD at the band at little over three inches.
All hardwood construction.

$25.00Price:
Loading Updating cart…

MagnusCore Tool

This innovative tool was designed to be an alternative to the more elaborate “coring systems”. With this tool there is no set up, requiring no attachments or gated tool rests it is completely stabilized  by the under arm portion and the drop handle. It is so easy to control it is truly amazing! The Nano grained tungsten carbide tip is so sharp and cuts so freely that there is very little pressure needed and it cuts with almost no kick, being very pointed the tip folds the shavings so they exit the work piece readily.

Nano Grained Carbide is far more durable than Micro and you should easily get at least 100 cores before needing a replacement tip.

$199.00Price:
Loading Updating cart…

No Flex Sanding Extensions

Designed by Hannes for high function, made of 5/8” dia rod for no-flex performance. This larger diameter is easy to hold on to in use for better control and chatter free sanding even with the 5” disc. Each is drilled and tapped 5/16”-24 to accept the soft edge pad and has a set screw so it can be operated in reverse. The other end is turned to 3/8” to fit in your drill chuck.
Three lengths available 2″,4″and 6″ or as a complete set at a savings, please use drop down to select.

Additional DescriptionMore Details

Hannes also likes to use the 6” in his drill press for “after sanding”!


$0.00Price:
Loading Updating cart…

Sanding System

This is what you need to move up to the next level of Power sanding. The 5” discs and the superior extensions make for a more effective and satisfying sanding experience. Included – 3 no-flex extensions, 5” super soft edge back up pad and the four most used grits of Mirka sandpaper 120, 180, 220 and 320 each box contains 50 – 5” dia. Sheets, all hook and loop.
Buying this package will save you $11.75

Additional DescriptionMore Details

Hannes likes to use the 6″ on the drill press for after sanding, also griping the extension deep in the lathe chuck make a great little disc sander.


$145.00Price:
Loading Updating cart…

Tool Rest for Mini Lathe 5/8″ Stem Dia

Devised years ago for hat turning these tool rests are eminently useful for all kinds of turning especially for faceplate work.

Additional DescriptionMore Details

Made in two rest sizes; small with 5/8” rod meant for JoHannes’ mini hats and large with 1” rod for hats or medium to large bowls. Both have 1” stem and are available in two length; short for 14” and 16” lathes and long for 20” and 24” lathes. The mini size is also made with 5/8” extra short stem for mini lathes.

Mini Rest with 5/8” stem for mini lathes $36.00
Small Rest with 1” stem 14” thru 16” lathes $44.00
Large Rest with 1” stem 14” thru 16” lathes $52.00
Small Rest with 1” stem for 20” thru 24” lathes $46.00
Large Rest with 1” stem for 20” thru 24” lathes $54.00


$49.00Price:
Loading Updating cart…

Tool Rest Large for 14″-16″ Lathe 1″ Stem Dia

Devised years ago for hat turning these tool rests are eminently useful for all kinds of turning especially for faceplate work.

Additional DescriptionMore Details

Made in two rest sizes; small with 5/8” rod meant for JoHannes’ mini hats and large with 1” rod for hats or medium to large bowls. Both have 1” stem and are available in two length; short for 14” and 16” lathes and long for 20” and 24” lathes. The mini size is also made with 5/8” extra short stem for mini lathes.

Mini Rest with 5/8” stem for mini lathes $36.00
Small Rest with 1” stem 14” thru 16” lathes $44.00
Large Rest with 1” stem 14” thru 16” lathes $52.00
Small Rest with 1” stem for 20” thru 24” lathes $46.00
Large Rest with 1” stem for 20” thru 24” lathes $54.00


$72.00Price:
Loading Updating cart…

Tool Rest Large for 20″-24″ Lathe 1″ Stem Dia

Devised years ago for hat turning these tool rests are eminently useful for all kinds of turning especially for faceplate work.

Additional DescriptionMore Details

Made in two rest sizes; small with 5/8” rod meant for JoHannes’ mini hats and large with 1” rod for hats or medium to large bowls. Both have 1” stem and are available in two length; short for 14” and 16” lathes and long for 20” and 24” lathes. The mini size is also made with 5/8” extra short stem for mini lathes.

Mini Rest with 5/8” stem for mini lathes $36.00
Small Rest with 1” stem 14” thru 16” lathes $44.00
Large Rest with 1” stem 14” thru 16” lathes $52.00
Small Rest with 1” stem for 20” thru 24” lathes $46.00
Large Rest with 1” stem for 20” thru 24” lathes $54.00


$72.00Price:
Loading Updating cart…

Tool Rest Small for 14″-16″ Lathe 1″ Stem Dia

Devised years ago for hat turning these tool rests are eminently useful for all kinds of turning especially for faceplate work.

Additional DescriptionMore Details

Made in two rest sizes; small with 5/8” rod meant for JoHannes’ mini hats and large with 1” rod for hats or medium to large bowls. Both have 1” stem and are available in two length; short for 14” and 16” lathes and long for 20” and 24” lathes. The mini size is also made with 5/8” extra short stem for mini lathes.

Mini Rest with 5/8” stem for mini lathes $36.00
Small Rest with 1” stem 14” thru 16” lathes $44.00
Large Rest with 1” stem 14” thru 16” lathes $52.00
Small Rest with 1” stem for 20” thru 24” lathes $46.00
Large Rest with 1” stem for 20” thru 24” lathes $54.00


$56.00Price:
Loading Updating cart…

Tool Rest Small for 20″-24″ Lathe 1″ Stem Dia

Devised years ago for hat turning these tool rests are eminently useful for all kinds of turning especially for faceplate work.

Additional DescriptionMore Details

Made in two rest sizes; small with 5/8” rod meant for JoHannes’ mini hats and large with 1” rod for hats or medium to large bowls. Both have 1” stem and are available in two length; short for 14” and 16” lathes and long for 20” and 24” lathes. The mini size is also made with 5/8” extra short stem for mini lathes.

Mini Rest with 5/8” stem for mini lathes $36.00
Small Rest with 1” stem 14” thru 16” lathes $44.00
Large Rest with 1” stem 14” thru 16” lathes $52.00
Small Rest with 1” stem for 20” thru 24” lathes $46.00
Large Rest with 1” stem for 20” thru 24” lathes $54.00


$56.00Price:
Loading Updating cart…

Woodhat Instructional DVD by JoHannes Michelsen

Johannes Michelsen Creates The Original Woodhat.

90 minute professional instructional DVD

woodhat, dvd, woodturning, wood, turning, instruction, instructional, training, video

Additional DescriptionMore Details

woodturning tools,wood turning,wood,turning,tool,tools,hannestool,johannes michelsen


$29.95Price:
Loading Updating cart…
LoadingUpdating…

line
footer