The fixture consists of the items pictured and described below.With these on your grinder you can perfectly replicate the multi bevel grind every time. IT is basically plug and play if you already have a Wolverine set-up you simply put this into your base mounts at the prescribed seven inch back-set and you should get a bevel similar to what you have been doing if not adjusting in or out will get you there. Experimenting will yield many possibilities!
“Depth Guide-Flute up Fixture” using this device you will be able to set adjustable steel projection and also index the flute up. This is accomplished in existing “jigs” internally in the steel hold device, doing it that way makes it impossible to move the steel forward enough to grind all the flute length.
“Steel Hold Fixture” innovation is that there is nothing to prevent the steel from sliding all the way forward for grinding of the entire flute. Indexing being done as in the picture to the left, with flute-up and projection set simply lock the “T” handle and you are ready to grind.
“Pivot Plate” this is the magic, this is what creates the multi bevel grind. Using more than one point to pivot the steel hold fixture is key.
The two side pivots create the primary grind and then stepping up to the center-center pivot for the secondary grind and last the pivot for the final bevel is closest to the wheel.
For a bigger understanding of how this works go to our "Product Overview" and under there click on "Vector" for Michelsen grind!