Small handles are molded on a ¾” dia tube 18” long and have a ½” dia hole, which take the ½” steel and the 3/8” steel with insert. This means a single small handle could be used for these two pieces of steel. With a collet handle they could be easily interchangeable and also be removed for grinding and/or travel.

Large handles are molded on a 1” dia tube 22” long and have a ¾” hole, the 5/8” steel goes in with insert the ¾” 1” and 1 ¼” steel all have ¾” tangs. For steel purchased from HannesTool all tangs are fine tuned for that perfect “POP” fit when it is pulled quickly out. The holes in the handles are nominal ½” and ¾” the tangs need to be 3 to 5 thousandths undersized for that slip fit tolerance.

With the perfect tolerance collet handles require only one wrench to snug the collet around the steel sufficiently for woodturning. Over tightening could damage the treads on the aluminum and is not recommended or necessary.

Step-by-step steel setting for glue-in handles

• Using medium-thin superglue
• First put some glue inside the handle then insert the steel with a little rotation
• Now pull halfway out to see that it needs a bit more glue at the outer portion which is applied to the steel then back in and out with rotation
• Now pull just part way out to get a tiny shot of accelerator
• Finally insert the steel quickly back in making sure to line up the flute of the steel with the lobe of the handle that has the HannesTool name.
  • To remove steel from glue-in handles, just heat the top portion of the aluminum with a torch and simply remove steel with pliers.
  • Now install new steel with just a couple drops of thin superglue

“Handles that Talk” the orientation of flute to lobe communicates the location of the flute even at times when the flute is not visible, this “talk” is a kind of intelligence and is what we refer to when we call the HannesTool the intelligent choice!

Related posts

• HannesTool @ The AAW Symposium 2009 (0)
• Collet Handle Woodturning Tool For Easy Steel Removal (2)
• Welcome to HannesTool.com (17)
• Products Overview (0)
• Michelsen Grind (0)
• Testimonials (0)
• Tool Rest (0)

Just found out about your line of turning tools and I would like to order the 1/2″ diameter one with handle to try out. Please send me a quotation which includes shipping. I’ve retired from the tool business almost three years ago but I still have an interest in the new developments.

Regards,

Jerry Glaser

—————————————————————————————————————————-

Johannes,

I have been thoroughly enjoying my new HannesTool Gouge by Johannes Michelsen, this is one sweet tool. The handle fits perfectly in your hand, and is superbly balanced. If you’ve ever held a very fine writing instrument in your hand — like a Mont Blanc or Pelikan pen — or one of Angelo’s pens — you’ll know what I’m talking about.

Donna Banfield

—————————————————————————————————————————-

I saw your handles at the NH Symposium this past spring. The three lobe grip is what really interested me. I didn’t buy anything there but while I was working on a project at Ralph Tursini’s shop I spotted one of your tools. Ralph told me you had given him this tool to try out. Ralph went on to say how much he liked it. Thats what did it! I came back and placed my first order. I now have several and they’re by far the best handle I’ve seen or used in my opinion.

Thanks for a great product and the Woodhat DVD

Bill Walsh

—————————————————————————————————————————-

Johannes,

I like the ‘cone bone’ it looks like a formidable woodturning weapon! When it’s out of the prototype stage and you are in production, put my name on the list. To quote Will Smith in ‘Independence Day’, “I’ve GOT to get me one of these! Just like your gouges, I can see plenty of other uses for that tool in my woodturning.

Donna Banfield

Related posts

• HannesTool @ The AAW Symposium 2009 (0)
• Welcome to HannesTool.com (17)
• Tool Rest (0)
• Handles Setup and Use (0)
• Products Overview (0)
• Michelsen Grind (0)
• HannesTool Online Store (0)

Related posts

• HannesTool @ The AAW Symposium 2009 (0)
• Handles Setup and Use (0)
• Welcome to HannesTool.com (17)
• Tool Rest (0)
• Testimonials (0)
• Michelsen Grind (0)
• HannesTool Online Store (0)

We really enjoy these annual events and were happy to be part of it again. This time we introduced several new products, all of which were met with great approval. Deb and I are proud to provide what we feel is the “right stuff” for woodturners with the HannesTool gouges as our focal product and other products in support of the whole concept  have all the “right stuff” to come to a good end with your woodturning endeavors!

Here are a few pix for you to see how much fun we had and if you would like to see pix of our travels go here.

Tags:Gouge,hannestool,JoHannes,lathe,lathe gouge,lathe tools,wood turning,woodturning,woodturning tools

Related posts

• Testimonials (0)
• Welcome to HannesTool.com (17)
• Handles Setup and Use (0)
• Products Overview (0)
• HannesTool Online Store (0)
• HannesTool Gouge (0)
• Tool Rest (0)

Please feel free to call us at the studio anytime for more information or to place an order, we acept Visa or MC and we can even work out payment by check if you prefer. Studio Phone # 802-362-3481

Stay tuned for updates and return often to checkout all of our new products photos and videos.

Please comment on the post below; give us some feedback… do you like the website? what would you like to see more of?

Related posts

• HannesTool Online Store (0)
• HannesTool Gouge (0)
• HannesTool @ The AAW Symposium 2009 (0)
• Testimonials (0)
• Handles Setup and Use (0)
• Products Overview (0)
• Tool Rest (0)